$795,000 | Naples, FL

• Woodwork Alpi Mahogany
• Doors to units for improved fresh air circulation
• Wengé Alpi cabinets base boards
• Edges of steps in Wengé Alpi
• Parquet type laminated floors
• Taupe Cushions
• Pilot bench seat in " PVC"
• Ivoire Carpet, in Cabins
• LED lighting
• SALOON
• 2 leaved aft window doors with black lacquered aluminum frame, Tinted glass, Blackout curtain
• Sliding, opening side windows in black aluminum and tinted glass, with blinds
• Storage under bench seats
• Salon table in varnished wood, on removable foot, with extension. Tilting for better storage
• 2 Removable armchairs
• Cabinet on portside: Bar with storage space and location provided for retractable 32 LED TV (option) as well as for the
• on-board glass wore (option)
• Illuminated storage recess
• Storage unit with location for Radio/CD/DVD player
• Leather covered stainless steel handrail on ceiling
• Access step to wheelhouse, Courtesy lighting
• Radio/CD/MP3 USB,AUX with 2 speakers in saloon and 4 exterior watertight speakers (2 in the cockpit - 2 in flying bridge)
• GALLEY (U-SHAPED ON STARBOARD)
• Tinted glass sliding window in front of sink with wood strip blind
• Resin worktop with stainless steel 2 basin sink, washing up drainer and bin access
• Mixer taps with hot/cold water under pressure
• 3 burner gas ovens with pan holder
• Rubbish locker accessed from alleyway
• Extractor hood
• Plentiful storage with cubbyholes and cutlery drawer
• Wall hung cabinets white lacquered
• Serving hatch unit with "serving tray"
• 2 Built-in 130 L refrigerators in unit to port. (Possible to have one of the two replaced by a drawer refrigerator with 60 L fridge and 84 L freezer as an option)
• Spotlights LED, Sockets 110V
• Stacking storage on fridge unit to store small electrical goods
• DINETTE / SEA BERTH
• Alpi table with adjustable foot, convertible to bench seat/berth
• Storage for extra seat
• Storage for extra backrest
• Sliding window in non-tinted glass
• Storage under bench seats (depending on options)
• FULL WIDTH OWNER'S CABIN
• 2 Panoramic opening porthole-fitted portlights with blinds
• Central double berth with slatted base and marine mattress, mounted on gas strut with storage
• LED deckhead lights, indirect LED lighting, night lights to steps and bedside lights
• Two large, illuminated wardrobes with hanging locker and shelving
• Drawers
• Full height mirror on door
• Leather covered stainless steel handrail
• Desk and seating to port with 110 V socket
• Access door to private bathroom
• Access door to private toilets
• 220 V socket
• MASTER HEAD
• Electric Vacu-flush toilet with sewage tank in cockpit
• Hand basin
• Magazine storage console, Towel rail
• 2 HEADS
• Shower compartment with full inner molding
• 80 L water heater / 21 Us Gal
• Teak slatted, built-in seat
• Sockets 110V
• Aluminum strip blinds
• Opening hull porthole
• Wastewater drained by gravity to buffer tank (50 L / 13 US Gal)
• Electric Vacu-flush toilet with sewage tank in cockpit (Guests head)
• Opening hull porthole
• Thermostatic mixers tap with hot/cold pressurized water supply, in showers area
• Mirror with back lighting
• Toilet accessory rack
• Hooks for towel/mitt
• Towel rail (Aft head)
• GUEST CABINS (FORWARD)
• Central Island Bed berth mounted on strut for storage
• Slatted bed base
• Marine mattress
• Storage, Hanging locker, Drawers
• Lighting and reading spotlights
• 1 Opening hatch Lewmar® T44 - with blind - Mosquito net
• 2 Opening hull portholes with curtains
• Full height mirror on door
• GUEST CABINS (PORT SIDE)
• (Other layout versions available (see Optional extras))
• 2 Individual bunk berths
• Marine mattress
• Hanging locker, Storage space and reading lamps
• Large storage space with sliding tablet (taking a washing machine and dryer with external venting as an option)
• 2 Opening hull portholes with curtains

• Grey tinted windscreen in PMMA
• Steering console with: Steering compass - Steering wheel - Electrical engine controls, Tiller angle indicator - Rev counter - Fuel gauges - Joystick
• Controls for bow and stern thruster, windlass, flaps, lighting, navigation lights and foghorn (depending on options)
• Adjustable pilot seat, Adjustable co-driver's seat to port
• Sliding flybridge saloon table with extensions
• Bench seat on portside with access to built-in serving hatch
• Starboard bench seat, Storage
• PVC Diamante Storm & Snow upholstery on flybridge
• Stainless steel handrail
• Console cover Fly + Seat of Fly, To starboard
• Galley unit with sink and hot and cold pressurized mixer tap, flybridge wastebin, Compartment for refrigerator (optional), Place for electric grill (optional)
• Removable extra lighting
• Storage unit to starboard
• Polyester hoop bar with fitted spotlights and loudspeakers
• Quarterdeck for storing dinghy or for use as terrace
• Structurally reinforced position for installation of Bezenzoni electric crane offered as optional extra to lift dinghy (max load 200Kg / 441 lbs.)
• Space for life raft with stainless steel fixing bolt plates
• Flagpole bracket on starboard aft pulpit
• GRP door with retaining bar to close off access to stairway

• 2 VHF radios upper and lower Helm
• 4 Raytheon gS series screens 2 at Upper Helm 2 at Lower Helm.
• Auto pilot
• IPS Joystick with dynamic positioning system
• Trim tab control
• Camera Stern
• Camera Port Stern Quarter
• Camera Starboard Stern Quarter
• ACR emergency Beacon

• 24/110 V Electrical panel 
• Electrical battery switches
• Radio-controlled wireless switches (without battery)
• 2 x 220 V - 60hz 50A 
• 110 V sockets in saloon, galley, wheelhouse and cabins
• 2 Battery chargers 40 Ah
• Inverter 12 V / 24 V
• Sockets 12V in wheelhouse
• 4 140 Ah service batteries and 4 x 50 Ah starter batteries
• Windlass
• Electric trim tabs Lenco®
• Stainless steel navigation lights
• Mooring light
• 3 Electric windscreen wipers with synchronizing system
• 2 Automatic electric bilge pumps
• 2 Engine hold ventilators
• Electric water heater on shore supply or on engine exchanger (80 L / 21 US Gal)
• Inside lighting, cockpit, alleyways and flying bridge

• 2 Engines 2 x D6 IPS 600 - 2 x 435 CV/HP Diesel (2 x 320 Kw)
• Propellers jackshaft DP
• Fuel tanks: 2 x 1 350 L / 2 x 357 US Gal, inter-connected and pre-fitted for FPS connection system (Fuel Polishing System)
• Foam soundproofing in engine compartment
• Side air intakes
• 2 Electric engine hold ventilators
• Extinguishers in engine hold with remote controls
• Inert gas system for engine protection
• Batteries centered beneath slatted floor
• Electrical boxes

Softs Volvo:

• Trip computer
• Cruise control
• Single lever
• Low speed

• Teak slatted self-draining cockpit
• 1 Gangway door to protect cockpit against wind and spray
• Stainless steel stanchion on flying bridge
• Teak-slatted L-shaped cockpit bench seat
• Access hatch to lazarette or crew cabin (according to the layout)
• Access hatch to engine compartment
• Access stairway to flybridge with gas bottle stowage position
• Access door to aft swim deck
• Sunbathing platform with solid wood slats and stainless-steel protection
• Retractable ladder in swimming platform with solid wood steps and stainless-steel handrails

Composition:

• Sandwich (Polyester resin - Glass fiber / Balsa core)
• White gel coat
• Diamond tip type non-slip covering
• Structural counter molding in monolithic laminate
• Teak bulwarks
• Gangway door to starboard, Stainless-steel handrail
• Water filling drain plug
• Fuel filler
• Wastebin access hatch
• MOORING LINES - MOORING
• Dolphin nose, stainless steel structure with teak plank
• Swivel bow fitting in stainless steel
• Electric windlass Lewmar 24V 2000W 
• Remote control in mooring locker + windlass control from wheelhouse and flying bridge steering stations
• 2 Mooring lockers
• 6 Aluminum mooring cleats (400mm) (2 forward - 2 amidships - 2 aft) + 1 OEM Cleet added by the pilot house door by owner
• Stainless steel gunwale guards
• 2 Stainless steel fairleads to aft of cockpit
• SAFETY ON DECK
• High bulwarks (65 cm) ensuring protection right around the deck
• Stainless steel pulpit
• Stainless steel and teak cockpit surround
• On flying bridge: Stainless steel pulpit completely surrounding aft of flying bridge with stainless steel guardrails on snap shackles to facilitate launching of dinghy and life raft

Composition:

• Sandwich (Polyester resin - Glass fiber / Balsa core)
• White gel coat
• Structural hull counter molding in monolithic laminate

Profile:

• Semi-floating hull

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing.

X